2-Port Gigabit PoE+ Extender - 802.3at and 802.3af - 100 m (330 ft)

2-Port Gigabit PoE+ Extender - 802.3at and 802.3af - 100 m (330 ft)

$168.99

Extend two Power over Ethernet devices by 100 meters, or daisy chain up to four extenders for longer distance

SKU: POEEXT2GAT Category:

Specifications & Compliance

UPC
065030865456
Brand
StarTech.com
Included in Package
1 - Gigabit PoE extender, 4 - rubber feet, 1 - quick-start guide
Shipping (Package) Weight
13.0 oz [367 g]
Weight of Product
8.4 oz [239.0 g]
Product Length
5.5 in [14.0 cm]
Product Width
3.0 in [77.0 mm]
Product Height
1.1 in [27.0 mm]
Package Depth
4.8 in [12.3 cm]
Package Width
6.7 in [16.9 cm]
Package Height
3.9 in [99 mm]
Color
Black
Warranty
2 Years
Connector 1
RJ-45
Connector 1 (Quantity)
3
Package Quantity
1
Operating Temperature
0°C to 50°C (32°F to 122°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Humidity
5~90% RH (Non-Condensing)
Material
Steel
Maximum Data Transfer Rate
2 Gbps (Full-Duplex)
Industry Standards
IEEE 802.3af PoE, IEEE 802.3at PoE+, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
Power Source
PoE-Powered
Special Notes
Total extension distances can often be shorter due to power delivery voltage-drop on the connected cables. Maximum distances can vary based on the quality of the UTP cables and the environment.
Output Voltage
52 ~ 56 DC
Power Consumption
3 W Max
MTBF
50,000 Hours
LED Indicators
3 - Port Link / Activity, 3 - PoE Power
Number of Ports
2
System and Cable Requirements
If your connected device does not meet the IEEE 802.3af or IEEE 802.3at PoE standard, then the POEEXT2GAT will not pass-through power to the connected device / Ethernet cable.
Compatible Networks
10/100/1000 Mbps
General Specifications
Power Output: up to 23W
Maximum Cable Length
328.1 ft [100 m]
Auto MDIX
Yes
Full Duplex Support
Yes
Jumbo Frame Support
No
Flow Control
Half-duplex back-pressure <br /> IEEE 802.3x pause frame for full-duplex
Surge Protection
EN61000-4-2 (ESD) - 4kV <br /> EN61000-4-5 (Surge) - 4kV
Patents and Licenses
The following patents are licensed for this product. This list might not be all inclusive.<br> • United States Patent No. 5,406,260 (expired)<br> • United States Patent No. 6,650,622<br> • United States Patent No. 7,457,250<br> • United States Patent No. 8,155,012<br> • United States Patent No. 8,902,760<br> • United States Patent No. 8,942,107<br> • United States Patent No. 9,019,838<br> • United States Patent No. 9,049,019<br> • United States Patent Application No. 14/695,456<br> • United States Patent Application No. 14/726,940<br>
Switching Architecture
Store-and-Forward
Auto-Negotiation
Yes

Questions & Answers

Why is my network performance poor when I use this Ethernet extender?
It is highly recommended that solid Ethernet cables are used with this product to make sure that the signal is as strong as it can be. This type of cable is great at preventing loss of signal strength, as long as great flexibility in the cable is not required. Stranded Ethernet cables are the most commonly used type of Ethernet cable, but this type of cable can result in a gradual loss of signal strength the longer the cable is. Solid Ethernet cables are preferred if the cables are used behind walls from patch panels to wall jacks. Stranded Ethernet cables are preferable when you need shorter and more flexible cables. Good examples of this are when you need an Ethernet cable on the server side of the patch panel, or at workstations.

Related products