VDSL2 Ethernet Extender Kit over Single Pair Wire, Up to 0.6mi (1km) Long Range LAN Repeater over Phone Line/CAT5e/CAT6, Up to 300Mbps

VDSL2 Ethernet Extender Kit over Single Pair Wire, Up to 0.6mi (1km) Long Range LAN Repeater over Phone Line/CAT5e/CAT6, Up to 300Mbps, Replacement for 110VDSLEXT - TAA

$535.04

Extend a network up to 0.6 miles (1km) over single pair wire/phone line wire UTP

SKU: VDSL-LAN-EXTENDER-1G Category:

Specifications & Compliance

UPC
065030899925
Brand
StarTech.com
Included in Package
2 - VDSL Extender, 2 - Mounting Bracket Kits, 2 - Power Supply, 1 - Quick-Start Guide
Shipping (Package) Weight
23.6 oz [668 g]
Weight of Product
4.1 oz [116.0 g]
Product Length
3.8 in [97.0 mm]
Product Width
2.9 in [74.0 mm]
Product Height
0.9 in [23.0 mm]
Package Depth
5.9 in [15 cm]
Package Width
7.1 in [18 cm]
Package Height
5.1 in [13 cm]
Color
Black
Warranty
2 Years
Connector 1
RJ-45
Connector 1 (Quantity)
2
Package Quantity
1
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Humidity
0% ~ 95% RH (non-condensing)
Material
Plastic
Maximum Data Transfer Rate
300Mbps (150 upstream/150 downstream)
Industry Standards
IEEE 802.3 <br> IEEE 802.3u <br> IEEE 802.3z <br> IEEE 802.1Q <br> VDSL2 Profiles 35b/30a/17a <br> ITU-T G993.1/G993.2/993.5/G.997.1/G.998.4 (G.INP)
Power Source
2 AC Adapters Included
Chipset ID
RTL8685FB-CG
Special Notes
Maximum distance was achieved using 26AWG UTP cabling
Input Voltage
100 - 240 AC
Output Voltage
12V DC
Power Consumption
3.8W
MTBF
50,000 Hours
LED Indicators
1 - Power, 3 - LAN: 10/100/100Mbps, 1 - Remote/Master Mode, 1 - VDSL Link
Number of Ports
1
Input Current
0.5
Output Current
1
Host Connector 1
RJ-45
Host Connector 1 (Quantity)
2
Plug Type
M
Center Tip Polarity
Positive
General Specifications
On-board Surge Protection
Auto MDIX
Yes
Rack-Mountable
No
Max Distance
1 km (0.6 mi)
Cabling
Cat 5e UTP or better
Jumbo Frame Support
No

Questions & Answers

What DC barrel connector power plug types do StarTech.com products use, and what are their dimensions?
StarTech.com DC barrel connector plug types are defined in the “Plug Type” field of the technical specifications, using a letter code that specifies the connector’s outer diameter (OD) and inner diameter (ID) in millimeters for power adapter compatibility. Explanation: In StarTech.com technical specifications, the “Plug Type” field is a standardized identifier for the exact DC barrel connector size required to power a product. Each plug type is assigned a letter code that corresponds to a specific combination of outer diameter (OD) and inner diameter (ID), measured in millimeters. Common DC barrel plug type dimensions Plug Type OD ID A 2.35 mm 0.7 mm B 4.0 mm 1.7 mm C 4.75 mm 1.7 mm H 3.4 mm 1.3 mm L 5.0 mm 2.5 mm M 5.5 mm 2.1 mm N 5.5 mm 2.5 mm The DC barrel connector plug type must match both the outer diameter and inner diameter exactly. A mismatch between the StarTech.com product requirement and the power adapter connector can prevent proper fit or stable power delivery, which may result in device startup failure or intermittent operation. The plug type defines only the physical connector size. The plug type does not define electrical power requirements such as voltage, current, or polarity. The power adapter used with a StarTech.com product must match the product’s specified electrical requirements. Using an incompatible power adapter can cause device malfunction or permanent damage. This standardized DC barrel connector plug type system enables IT professionals and procurement teams to verify connector dimensions, ensure power adapter compatibility, standardize hardware deployments, and identify the correct replacement power supply for StarTech.com products.

Related products