Juniper CTP-SFP-1GE-LX Compatible SFP Module - 1000BASE-LX - 1GbE Single Mode Fiber SMF Optic Transceiver - 1GE Gigabit Ethernet SFP - LC

Juniper SFP-1FE-FX Compatible SFP Module - 100BASE-FX - 100MbE Multimode Fiber MMF Optic Transceiver - 100Mb Ethernet SFP - LC 2km - 1310nm - DDM

$70.99

155 Mbps | Multi Mode Fiber | LC | 2 km (1.2 mi) | Lifetime Warranty

SKU: SFP1FEFXST Category:

Specifications & Compliance

UPC
065030883894
Brand
StarTech.com
Included in Package
1 - SFP Transceiver
Shipping (Package) Weight
2.0 oz [56 g]
Weight of Product
2.5 oz [72.0 g]
Product Length
2.6 in [65.0 mm]
Product Width
0.6 in [14.0 mm]
Product Height
0.5 in [12.0 mm]
Package Depth
3.7 in [94 mm]
Package Width
4.4 in [11.2 cm]
Package Height
1.3 in [34 mm]
Warranty
3 Years
Connector 1
SFP Slot
Connector 1 (Quantity)
1
Package Quantity
1
Connector 2
LC Duplex Fiber
Connector 2 (Quantity)
1
Material
Steel
Maximum Data Transfer Rate
100 Mbps
Industry Standards
IEEE 802.3 100BASE-FX
MTBF
1,472,572 hours
Fiber Type
Multi Mode
Wavelength
1310nm
Compatible Brand
Juniper
Max Transfer Distance
2 km (1.2 mi)
Fiber Operating Mode
Full-Duplex
Digitial Diagnostics Monitoring Support
Yes
OEM Part Number
SFP-1FE-FX

Questions & Answers

Why is my SFP Transceiver not working with my Network Device?
Ensure the Network Device is running a compatible Firmware Version on a compatible Operating System . Please consult the manufacturer of the Network Device for more information regarding the minimum required or recommended system software.

What is the difference between UPC and APC fiber connectors, and which type do StarTech.com fiber products use?
UPC and APC connectors differ in their end-face polish, and StarTech.com fiber products use UPC connectors. Explanation: UPC (Ultra Physical Contact) and APC (Angled Physical Contact) are fiber connector types that differ in how the fiber end face is polished: UPC connectors: The fiber end face is polished flat with a slight dome shape to ensure direct core contact and low insertion loss. APC connectors: The fiber end face is polished at an 8-degree angle to reduce back reflection in high-performance applications. UPC and APC connectors are not compatible and should not be mated. The angled surface of an APC connector prevents proper alignment with a UPC connector, which can result in high signal loss or a failed connection. StarTech.com fiber products use UPC connectors, so they must be connected to other UPC-compatible fiber interfaces to ensure proper operation.

Related products