Industrial 8 Port Gigabit Ethernet Switch - Hardened Compact GbE Layer/L2 Managed Switch - Rugged Network Switch Din Rail/Wall Mountable

Industrial 8 Port Gigabit Ethernet Switch - Hardened Compact GbE Layer/L2 Managed Switch - Rugged Network Switch Din Rail/Wall Mountable RJ45/LAN Switch IP-30/-40C to +75C Temp

$131.99

Industrial Managed Ethernet Switch | 10/100/1000Mbps | 8 RJ45 Ports | Wall-Mountable

SKU: IES81GW Category:

Specifications & Compliance

UPC
065030868457
Brand
StarTech.com
Included in Package
1 - network switch, 1 - universal power adapter (NA/JP, UK, EU, ANZ), 1 - terminal block connector, 4 - screw anchors, 4 - screws, 4 - attaching pins, 4 - locking clips, 4 - washers, 4 - magnets, 1 - DIN rail, 3 - DIN-rail screws, 8 - dust caps, 1 - quick-start guide
Shipping (Package) Weight
34.0 oz [964 g]
Weight of Product
17.3 oz [490.0 g]
Product Length
5.3 in [13.4 cm]
Product Width
5.8 in [14.8 cm]
Product Height
1.0 in [25.0 mm]
Package Depth
6.7 in [17 cm]
Package Width
11.8 in [30 cm]
Package Height
3.5 in [90 mm]
Color
Black
Warranty
2 Years
Connector 1
RJ-45
Connector 1 (Quantity)
8
Package Quantity
1
Connector 2
Terminal Block (3 Wire)
Connector 2 (Quantity)
1
Operating Temperature
-40°C to 75°C (-40°F to 167°F)
Storage Temperature
-40°C to 90°C (-40°F to 194°F)
Humidity
5~95% RH (Non-Condensing)
Material
Steel
Maximum Data Transfer Rate
2 Gbps (Full-Duplex)
Industry Standards
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-TX, IEEE 802.3x Flow Control
Power Source
AC Adapter Included
Input Voltage
100 - 240 AC
Output Voltage
12V DC
MTBF
> 100,000 hrs @ 25 degrees C
LED Indicators
1 - Power, 8 - 10/100 Mbps and Link/Activity (yellow)<br /> 1000 Mbps and Link/Activity (green)
Number of Ports
8
Output Current
1.5
Plug Type
M
Compatible Networks
10/100/1000 Mbps
Center Tip Polarity
Positive
Maximum Cable Length
328.1 ft [100 m]
Auto MDIX
Yes
Full Duplex Support
Yes
Jumbo Frame Support
9K max.
Supported Protocols
IEEE 802.3ad Port Trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, RFC 3810 MLD version 2, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP version 1, RFC 2236 IGMP version 2, RFC 3376 IGMP version 3, RFC 2710 MLD version 1, IEEE 802.1Q VLAN Tagging, IEEE 802.1x Port Authentication Network Control, bIEEE 802.1ab LLDP, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP
Flow Control
IEEE 802.3x pause frame for full-duplex, back pressure for half-duplex
Surge Protection
6kV ESD, 6kV EFT
Buffer Size
512 KB
Switching Architecture
Store-and-Forward

Questions & Answers

What is this device’s default static IP address?
This device's default static IP address is 192.168.0.100.

How do I access this device’s web interface?
Make sure that the IES81GW is on the same network as your computer. In an Internet browser, enter the IP address of the unit. The default IP address is 192.168.0.100. In the user name field, enter the user name. The default user name is admin . In the password field, enter the password. The default password is admin .

What DC barrel connector power plug types do StarTech.com products use, and what are their dimensions?
StarTech.com DC barrel connector plug types are defined in the “Plug Type” field of the technical specifications, using a letter code that specifies the connector’s outer diameter (OD) and inner diameter (ID) in millimeters for power adapter compatibility. Explanation: In StarTech.com technical specifications, the “Plug Type” field is a standardized identifier for the exact DC barrel connector size required to power a product. Each plug type is assigned a letter code that corresponds to a specific combination of outer diameter (OD) and inner diameter (ID), measured in millimeters. Common DC barrel plug type dimensions Plug Type OD ID A 2.35 mm 0.7 mm B 4.0 mm 1.7 mm C 4.75 mm 1.7 mm H 3.4 mm 1.3 mm L 5.0 mm 2.5 mm M 5.5 mm 2.1 mm N 5.5 mm 2.5 mm The DC barrel connector plug type must match both the outer diameter and inner diameter exactly. A mismatch between the StarTech.com product requirement and the power adapter connector can prevent proper fit or stable power delivery, which may result in device startup failure or intermittent operation. The plug type defines only the physical connector size. The plug type does not define electrical power requirements such as voltage, current, or polarity. The power adapter used with a StarTech.com product must match the product’s specified electrical requirements. Using an incompatible power adapter can cause device malfunction or permanent damage. This standardized DC barrel connector plug type system enables IT professionals and procurement teams to verify connector dimensions, ensure power adapter compatibility, standardize hardware deployments, and identify the correct replacement power supply for StarTech.com products.

Related products