Industrial 8 Port Gigabit PoE Switch - 4 x PoE+ 30W - Power Over Ethernet - Hardened GbE Layer/L2 Managed Switch - Rugged High Power

Industrial 8 Port Gigabit PoE Switch - 4 x PoE+ 30W - Power Over Ethernet - Hardened GbE Layer/L2 Managed Switch - Rugged High Power Gigabit Network Switch IP-30/-40C to +75C - TAA

$309.54

Connect up to 8 different GbE (4 PoE+) devices, using this IP30 industrial Ethernet switch with intelligent Layer 2 management

SKU: IES81GPOEW Category:

Specifications & Compliance

UPC
065030871112
Brand
StarTech.com
Included in Package
1 - network switch, 1 - terminal block connector, 4 - screw anchors, 4 - screws, 4 - attaching pins, 4 - locking pins, 4 - washers, 4 - magnets, 1 - DIN rail, 3 - DIN-rail screws, 8 - RJ45 dust caps, 1 - quick-start guide
Shipping (Package) Weight
34.9 oz [988 g]
Weight of Product
23.7 oz [672 g]
Product Length
5.3 in [13.4 cm]
Product Width
4.6 in [11.8 cm]
Product Height
1.0 in [25 mm]
Package Depth
12.1 in [30.8 cm]
Package Width
6.9 in [17.6 cm]
Package Height
3.6 in [92 mm]
Color
Black
Warranty
2 Years
Connector 1
RJ-45
Connector 1 (Quantity)
4
Package Quantity
1
Connector 2
RJ-45
Connector 2 (Quantity)
4
Operating Temperature
-40°C to 75°C (-40°F to 167°F)
Storage Temperature
-40°C to 90°C (-40°F to 194°F)
Humidity
5~95% RH (Non-Condensing)
Material
Steel
Maximum Data Transfer Rate
2 Gbps (Full-Duplex)
Industry Standards
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3u 100BASE-FX, IEEE 802.3z 1000BASE-SX,IEEE 802.3z 1000BASE-LX, 4-Port IEEE 802.3af/at Power over Ethernet end-span PSE
Power Source
Terminal Block
Special Notes
4 ports support IEEE 802.3at Power over Ethernet Plus (PoE+) and IEEE 802.3af Power over Ethernet (PoE), Supports PeE Powered Device alive check, scheduled power recycling, and time-based PoE schedule, PoE power up to 30W per PoE+ port (120W budget) and remote PoE power control, A power adapter is not included with this switch.
Input Voltage
48 ~ 56V DC
Connector 3
Terminal Block (3 Wire)
Connector 3 (Quantity)
1
MTBF
> 100,000 hrs @ 25 degrees C
LED Indicators
1 - Power, 8 - PoE Active (yellow)<br /> Link/Activity (green)
Number of Ports
8
Input Current
1A minimum
Plug Type
M
Compatible Networks
10/100/1000 Mbps
Maximum Cable Length
328.1 ft [100 m]
Auto MDIX
Yes
Full Duplex Support
Yes
Jumbo Frame Support
9K max.
Supported Protocols
IEEE 802.3ad Port Trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, RFC 3810 MLD version 2, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP version 1, RFC 2236 IGMP version 2, RFC 3376 IGMP version 3, RFC 2710 MLD version 1, IEEE 802.1Q VLAN Tagging, IEEE 802.1x Port Authentication Network Control, bIEEE 802.1ab LLDP, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP
Flow Control
IEEE 802.3x pause frame for full-duplex, back pressure for half-duplex
Surge Protection
6kV ESD, 6kV EFT
Buffer Size
512 KB
Patents and Licenses
The following patents are licensed for this product. This list might not be all inclusive.<br> • United States Patent No. 5,406,260 (expired)<br> • United States Patent No. 6,650,622<br> • United States Patent No. 7,457,250<br> • United States Patent No. 8,155,012<br> • United States Patent No. 8,902,760<br> • United States Patent No. 8,942,107<br> • United States Patent No. 9,019,838<br> • United States Patent No. 9,049,019<br> • United States Patent Application No. 14/695,456<br> • United States Patent Application No. 14/726,940<br>
Switching Architecture
Store-and-Forward

Questions & Answers

What is this device’s default static IP address?
This device's default static IP address is 192.168.0.100.

How do I access this device’s web interface?
Make sure that the IES81GPOEW is on the same network as your computer. In an Internet browser, enter the IP address of the unit. The default IP address is 192.168.0.100. In the user name field, enter the user name. The default user name is admin . In the password field, enter the password. The default password is admin .

What DC barrel connector power plug types do StarTech.com products use, and what are their dimensions?
StarTech.com DC barrel connector plug types are defined in the “Plug Type” field of the technical specifications, using a letter code that specifies the connector’s outer diameter (OD) and inner diameter (ID) in millimeters for power adapter compatibility. Explanation: In StarTech.com technical specifications, the “Plug Type” field is a standardized identifier for the exact DC barrel connector size required to power a product. Each plug type is assigned a letter code that corresponds to a specific combination of outer diameter (OD) and inner diameter (ID), measured in millimeters. Common DC barrel plug type dimensions Plug Type OD ID A 2.35 mm 0.7 mm B 4.0 mm 1.7 mm C 4.75 mm 1.7 mm H 3.4 mm 1.3 mm L 5.0 mm 2.5 mm M 5.5 mm 2.1 mm N 5.5 mm 2.5 mm The DC barrel connector plug type must match both the outer diameter and inner diameter exactly. A mismatch between the StarTech.com product requirement and the power adapter connector can prevent proper fit or stable power delivery, which may result in device startup failure or intermittent operation. The plug type defines only the physical connector size. The plug type does not define electrical power requirements such as voltage, current, or polarity. The power adapter used with a StarTech.com product must match the product’s specified electrical requirements. Using an incompatible power adapter can cause device malfunction or permanent damage. This standardized DC barrel connector plug type system enables IT professionals and procurement teams to verify connector dimensions, ensure power adapter compatibility, standardize hardware deployments, and identify the correct replacement power supply for StarTech.com products.

Related products