2-Port Gigabit Midspan PoE+ Injector, 10/100/1000Mbps, PoE+ (802.3af/at), 30W, 1Gbps Ethernet, Wall Mountable, Unmanaged Inline Power Over

2-Port Gigabit Midspan PoE+ Injector, 10/100/1000Mbps, PoE+ (802.3af/at), 30W, 1Gbps Ethernet, Wall Mountable, Unmanaged Inline Power Over Ethernet

$72.76

Supply power and data to two PoE devices over standard Ethernet cabling

SKU: AF221C-POE-INJECTOR Category:

Specifications & Compliance

UPC
065030900911
Brand
StarTech.com
Included in Package
1 - PoE Injector, 1 - NA Power Adapter, 1 - Quick-Start Guide
Shipping (Package) Weight
3.9 oz [110 g]
Weight of Product
2.1 oz [60.0 g]
Product Length
4.0 in [10.2 cm]
Product Width
1.8 in [46.0 mm]
Product Height
1.0 in [25.0 mm]
Package Depth
6.7 in [17 cm]
Package Width
5.6 in [14.2 cm]
Package Height
1.2 in [30 mm]
Color
Black
Warranty
2 Years
Connector 1
RJ-45
Connector 1 (Quantity)
1
Package Quantity
1
Connector 2
RJ-45
Connector 2 (Quantity)
1
Operating Temperature
0°C - 60°C (32°F - 140°F)
Storage Temperature
‐10°C - 70°C (14°F - 158°F)
Humidity
5% - 90% RH (non-condensing)
Material
Plastic
Maximum Data Transfer Rate
1000 Mbps
Industry Standards
IEEE 802.3at Type 2 / PoE+ (30 W), IEEE 802.3af Type 1 / PoE (15.4 W), IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3i (10BASE-T), IEC 61000-4-2 Level-4 ESD protection (8kV contact/15kV air)
Power Source
AC Adapter Included
Chipset ID
IC Plus - IP802AR
Input Voltage
100 - 240 AC
Output Voltage
52 DC
Power Consumption
65
LED Indicators
1 - LED Indicator<br> Solid Green: PoE Injector is receiving power, 1 - PoE Indicator<br> Solid Green: Indicates PoE has been negotiated and power is being supplied to the Powered Device
Number of Ports
2
Input Current
1.5
Output Current
1.25
Plug Type
M
Compatible Networks
10/100/1000 Mbps
Center Tip Polarity
Positive
Maximum Cable Length
328.1 ft [100 m]
Mounting Options
Surface Mount
Auto MDIX
Yes
Jumbo Frame Support
9K max.
Wake-On-LAN (WOL)
Yes
Supported Protocols
Wake-on-LAN (WoL)
PXE
Yes
Total Available Power Output
30W
ESD Protection
+/-8kV (Contact), +/-15kV (Air)

Questions & Answers

What DC barrel connector power plug types do StarTech.com products use, and what are their dimensions?
StarTech.com DC barrel connector plug types are defined in the “Plug Type” field of the technical specifications, using a letter code that specifies the connector’s outer diameter (OD) and inner diameter (ID) in millimeters for power adapter compatibility. Explanation: In StarTech.com technical specifications, the “Plug Type” field is a standardized identifier for the exact DC barrel connector size required to power a product. Each plug type is assigned a letter code that corresponds to a specific combination of outer diameter (OD) and inner diameter (ID), measured in millimeters. Common DC barrel plug type dimensions Plug Type OD ID A 2.35 mm 0.7 mm B 4.0 mm 1.7 mm C 4.75 mm 1.7 mm H 3.4 mm 1.3 mm L 5.0 mm 2.5 mm M 5.5 mm 2.1 mm N 5.5 mm 2.5 mm The DC barrel connector plug type must match both the outer diameter and inner diameter exactly. A mismatch between the StarTech.com product requirement and the power adapter connector can prevent proper fit or stable power delivery, which may result in device startup failure or intermittent operation. The plug type defines only the physical connector size. The plug type does not define electrical power requirements such as voltage, current, or polarity. The power adapter used with a StarTech.com product must match the product’s specified electrical requirements. Using an incompatible power adapter can cause device malfunction or permanent damage. This standardized DC barrel connector plug type system enables IT professionals and procurement teams to verify connector dimensions, ensure power adapter compatibility, standardize hardware deployments, and identify the correct replacement power supply for StarTech.com products.

Related products