Dual-Laptop USB-C KVM Docking Station, Dual Monitor 4K 60Hz DisplayPort Dock, 5-Port USB Hub, GbE, 90W/45W Power Delivery to Two Laptops

Dual-Laptop USB-C KVM Docking Station, Dual Monitor 4K 60Hz DisplayPort Dock, 5-Port USB Hub, GbE, 90W/45W Power Delivery to Two Laptops, Windows/Mac, 2-Host KVM Dock - TAA

$322.86

Share a dual 4K 60Hz workstation between two laptop computers through a USB Type-C connection

SKU: 129N-USBC-KVM-DOCK Category:

Specifications & Compliance

UPC
065030897242
Brand
StarTech.com
Included in Package
1 - USB-C Docking Station, 1 - Universal Power Adapter with Attached 5 ft [1.6 m] DC Cable, 2 - 3.3 ft [1 m] USB-C Host Cables, 1 - Quick-Start Guide, 2 - 6 ft [1.8 m] Regional Power Cables (NA/JP, ANZ)
Shipping (Package) Weight
3.4 lb [1.5 kg]
Weight of Product
14.2 oz [402.0 g]
Product Length
8.8 in [22.4 cm]
Product Width
3.5 in [90.0 mm]
Product Height
1.6 in [39.9 mm]
Package Depth
11.1 in [28.3 cm]
Package Width
6.4 in [16.3 cm]
Package Height
4.0 in [10.2 cm]
Color
Space Gray
Warranty
3 Years
Connector 1
USB-A (480Mbps, 2.5W)
Connector 1 (Quantity)
2
Package Quantity
1
Connector 2
USB-A (10Gbps, 4.5W)
Connector 2 (Quantity)
2
Operating Temperature
-10°C to 45°C (14°F to 113°F)
Storage Temperature
-20°C to 60°C (-4°F to 140°F)
Humidity
0~90% RH (Non-condensing)
Material
Plastic
Maximum Data Transfer Rate
USB 3.2 Gen 2 (10 Gbps)
Industry Standards
DisplayPort 1.4, USB 3.2 Gen 2 (10 Gbps), USB 2.0 (480Mbps), USB Power Delivery Specification Rev. 3.0, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Power Source
AC Adapter Included
Chipset ID
DisplayLink - DL6950, Genesys Logic - GL3590, Genesys Logic - GL9510, Parade - PS186, Realtek - RTL8211F
Special Notes
USB 3.2 Gen 2 (10Gbps) is also known as USB 3.1 Gen 2 (10Gbps), USB 3.1
Power Delivery
90W (to the active host computer ) / 45W (to the second computer)
Input Voltage
110V-240V AC
Output Voltage
20V DC
Connector 3
USB-C (10Gbps, 4.5W)
Connector 3 (Quantity)
1
Power Consumption
180
MTBF
42,209 Hours
LED Indicators
1 - Power LED (White): Illuminates When the Dock is Connected to a Power Source and Powered On, 1 - LAN Port - Network Status LED (Green): Illuminates to Indicate an Ethernet Link is Active, 1 - LAN Port - Network Activity LED (Amber): Blinks to Indicate Network Traffic
Bus Type
USB-C
Input Current
2.4 A
Output Current
9
Type and Rate
USB 10Gbps
System and Cable Requirements
Up to two host devices with available USB-C ports (to support laptop charging the host device's USB-C port must support USB Power Delivery)
Maximum Digital Resolutions
2x DisplayPort - 4096 x 2160p (4K) 60Hz
Host Connector 1 (Quantity)
2
Plug Type
CP (OD:7.4/ID:5.1/CPD:0.6)
Compatible Networks
10/100/1000 Mbps
Center Tip Polarity
Positive
Connector 4
3.5mm (3 Conductors, TRS)
Connector 4 (Quantity)
1
General Specifications
KVM Ports: 2, Rack-Mountable: No, On-Screen Display: No, IP Control: No, Port Selection Support: Push Button and Hot-Keys
Number of Displays
2
UASP Support
Yes
Connector 5
3.5mm (2 Conductor, TS)
Connector 5 (Quantity)
1
Full Duplex Support
Yes
Fast-Charge Port(s)
No
Connector 6
DisplayPort
Connector 6 (Quantity)
2
Wake-On-LAN (WOL)
Yes
Displays Supported
2
4K Support
Yes
Connector 7
RJ-45
Connector 7 (Quantity)
1
PXE
No
Compatible Lock Slot
Kensington Standard Slot (K-Slot), Kensington Nano Slot

Questions & Answers

How do I uninstall my USB video adapter in Windows 7, Windows 8, Windows 10, or Windows 11?
To uninstall the USB video adapter, disconnect the adapter from the computer, uninstall the DisplayLink Graphics Software, and restart the computer when prompted. Explanation: Before uninstalling the software, disconnect the USB video adapter from the computer. To remove the DisplayLink software: Open Control Panel . Select Programs and Features or Uninstall a Program . Locate DisplayLink Graphics in the list of installed programs. Right-click DisplayLink Graphics and select Uninstall . Follow the on-screen prompts to complete the removal process. Restart the computer when prompted.

I am having issues with my new network interface card (NIC) and my on-board NIC is still enabled. What do I do in Windows?
Sometimes an on-board network interface card (NIC) conflicts with a new NIC. In these cases it is best to disable the on-board NIC. The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible. To do this, consult your motherboard manual. You can also disable any NIC in Windows. Here is how you do this: First click Start , or, in Windows 10 and 8, hold down the Windows key and press X . Then click Control Panel . Windows 10 Click Network and Internet . Click Network and Sharing Center . On the left, click Change adapter settings . Right-click the NIC that you would like to disable and select Disable . Windows 8 Click Network and Sharing Center . On the left, click Change adapter settings . Right-click the NIC that you would like to disable and select Disable . Windows 7 Click Network and Internet . Click Network and Sharing Center . On the left, click Change adapter settings . Right-click the NIC that you would like to disable and select Disable . Windows Vista Click Network and Sharing Center . On the left, click Manage network connections . Right-click the NIC that you would like to disable and select Disable . Windows XP Click Network Connections . Right-click the NIC that you would like to disable and select Disable .

Why do I have speed or connectivity issues?
If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings. You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed. Note : You must log in as the local administrator before you continue. To open Device Manager: Press Windows key + R . Type devmgmt.msc . Click OK . Open the Networking adapters section. Right-click the network adapter that you want to change and select Properties . Click the Advanced tab. Scroll down to Speed & Duplex . By default, it is set to Auto-Negotiate . Select any of the speeds that you see in the list. Click OK and restart your computer.

Can I use my network card for a Preboot Execution Environment (PXE)?
StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met: The BIOS must support PXE. The BIOS must see the card. The environment must have drivers for the chipset used in the card. If using a USB networking card, the environment must have support for USB devices as well.

Related products