USB-C Multiport Adapter with Wireless Presenter Remote

USB-C Multiport Adapter with Wireless Presenter Remote

$128.99

USB-C Travel Dock + Presentation Remote | 4K HDMI | VGA | USB-A | GbE | Mac & Windows®

SKU: BNDDKTCHVPRS Category:

Specifications & Compliance

Manufacturer #
BNDDKTCHVPRS
UPC
065030881425
Brand
StarTech.com
Included in Package
1 - USB-C Multiport Adapter for Laptops (DKT30CHV), 1 - Presentation Remote (PRESREMOTE), 2 - AAA Batteries (PRESREMOTE), 1 - Carrying Case (PRESREMOTE), 2 - User Manuals (DKT30CHV/PRESREMOTE)
Shipping (Package) Weight
11.6 oz [329 g]
Weight of Product
6.8 oz [192.0 g]
Product Length
4.5 in [11.4 cm]
Product Width
2.1 in [54.0 mm]
Product Height
0.7 in [17.0 mm]
Package Depth
5.0 in [12.6 cm]
Package Width
8.8 in [22.3 cm]
Package Height
1.3 in [34 mm]
Color
Black
Warranty
3 Years
Connector 1
USB-C (5Gbps, 4.5W)
Connector 1 (Quantity)
1
Package Quantity
1
Connector 2
HDMI
Connector 2 (Quantity)
1
Operating Temperature
5°C to 35°C (41°F to 95°F)
Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Humidity
5~95% RH (Non-condensing)
Maximum Data Transfer Rate
5 Gbps (USB 3.0) <br / > 2 Gbps (Ethernet; Full-Duplex)
Industry Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab <br /> USB 3.0 - Backward compatible with USB 2.0 and 1.1 <br />
Power Source
USB-Powered
Chipset ID
Cypress - CYPD2122<br>Cypress - CYUSB3314<br>STMicroelectronics - STDP2650 <br>Chrontel - CH7517<br>ASIX - AX88179
Special Notes
For MacBook host systems using macOS 10.12, version 10.12.6 or later is required to support this product., Not all USB-C ports support the full functionality of the USB Type-C standard. Ensure that your laptop USB-C port supports DP alt mode., Only one video output port can be used at the same time (HDMI or VGA). If two displays are connected, the HDMI port takes priority., A 4K-capable display is required to achieve 4K x 2K resolution (4K is also known as 4K x 2K)., USB 3.0 is also known as USB 3.1 Gen 1; this connectivity standard offers speeds up to 5Gbps., The remote is a class 2 laser product, The USB-C port on your host must support DP Alt mode
Power Delivery
No PD Pass-Through
Connector 3
VGA
Connector 3 (Quantity)
1
Bus Type
USB-C
Type and Rate
USB 3.0 (5Gbps)
System and Cable Requirements
Host laptop with an available USB-C port (to ensure full functionality, the laptop's USB-C port must support DP alt mode).
Maximum Digital Resolutions
3840 x 2160p - 30Hz (HDMI)<br> Lower resolutions are also supported.
Compatible Networks
10/100/1000 Mbps
Connector 4
RJ-45
Connector 4 (Quantity)
1
General Specifications
Remote Interface: USB, Remote Max Distance: 27 m (90 ft.), Remote Wavelength: 650+20 mm, Remote Optical Power: 1mW, Remote Wireless Band: 2.4 GHz, Remote Power: Battery Powered, Remote Humidity: 30%~80% RH, Remote Operating Temperature: 5℃ to 45℃ (41°F to 113°F), Remote Storage Temperature: 5℃ to 45℃ (41°F to 113°F), Remote Color: Black, Remote Warranty: 2 Years
Number of Displays
1
UASP Support
Yes
Maximum Analog Resolutions
2048 x 1280p - 30Hz (VGA)
Connector 5
USB-A (5Gbps, 4.5W)
Connector 5 (Quantity)
1
Auto MDIX
Yes
Full Duplex Support
Yes
Fast-Charge Port(s)
No
Displays Supported
1
4K Support
Yes

Questions & Answers

I am having issues with my new network interface card (NIC) and my on-board NIC is still enabled. What do I do in Windows?
Sometimes an on-board network interface card (NIC) conflicts with a new NIC. In these cases it is best to disable the on-board NIC. The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible. To do this, consult your motherboard manual. You can also disable any NIC in Windows. Here is how you do this: First click Start , or, in Windows 10 and 8, hold down the Windows key and press X . Then click Control Panel . Windows 10 Click Network and Internet . Click Network and Sharing Center . On the left, click Change adapter settings . Right-click the NIC that you would like to disable and select Disable . Windows 8 Click Network and Sharing Center . On the left, click Change adapter settings . Right-click the NIC that you would like to disable and select Disable . Windows 7 Click Network and Internet . Click Network and Sharing Center . On the left, click Change adapter settings . Right-click the NIC that you would like to disable and select Disable . Windows Vista Click Network and Sharing Center . On the left, click Manage network connections . Right-click the NIC that you would like to disable and select Disable . Windows XP Click Network Connections . Right-click the NIC that you would like to disable and select Disable .

Why do I have speed or connectivity issues?
If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings. You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed. Note : You must log in as the local administrator before you continue. To open Device Manager: Press Windows key + R . Type devmgmt.msc . Click OK . Open the Networking adapters section. Right-click the network adapter that you want to change and select Properties . Click the Advanced tab. Scroll down to Speed & Duplex . By default, it is set to Auto-Negotiate . Select any of the speeds that you see in the list. Click OK and restart your computer.

Can I use my network card for a Preboot Execution Environment (PXE)?
StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met: The BIOS must support PXE. The BIOS must see the card. The environment must have drivers for the chipset used in the card. If using a USB networking card, the environment must have support for USB devices as well.

Related products