1U Hinged Wall Mount Patch Panel Bracket - 6 inch Deep - 19" Patch Panel Swing Rack for Shallow Network Equipment- 17lbs

1U Hinged Wall Mount Patch Panel Bracket - 6 inch Deep - 19" Patch Panel Swing Rack for Shallow Network Equipment- 17lbs

$31.76

Wall mount a patch panel or network switch while providing hinged access to the back of the device

SKU: WALLMOUNTH1 Category:

Specifications & Compliance

UPC
065030783507
Brand
StarTech.com
Included in Package
1 - Wall-Mount Rack, 4 - M6 Screws, 4 - M6 Cage Nuts, 4 - Plastic Washers, 2 - Wall Screws, 2 - Plastic Anchors
Shipping (Package) Weight
2.8 lb [1.3 kg]
Weight of Product
29.8 oz [843.0 g]
Product Length
6.0 in [15.2 cm]
Product Width
19.7 in [50.1 cm]
Product Height
1.7 in [44.0 mm]
Package Depth
20.9 in [53 cm]
Package Width
8.1 in [20.7 cm]
Package Height
3.1 in [79 mm]
Color
Black
Warranty
2 Years
Package Quantity
1
Material
Steel
Industry Standards
EIA/ECA-310-E
U Height
1U
Wallmountable
Yes
Frame Type
Open Frame
Maximum Mounting Depth
5.8 in [14.8 cm]
Construction Material
Steel
Rack Type
2-Post
Flat Pack (Assembly Required)
No
Mounting Hole Types
Square (For Cage Nut)
Mounting Rail Profile
L-Shape
Weight Capacity (No Casters)
17.6 lb [8 kg]

Questions & Answers

How do I check if a StarTech.com shelf is compatible with my server rack?
A StarTech.com shelf will fit a server rack if the rack supports 19-inch standard mounting and the shelf depth is within the rack’s supported mounting depth range. Explanation: StarTech.com server racks use the industry-standard 19-inch width, so most shelves designed for 19-inch racks are physically compatible in width. However, compatibility depends primarily on mounting depth and mounting type. Mounting depth compatibility: For shelves that mount on all four posts (4-post racks or cabinet racks), the shelf depth must fall within the rack’s minimum and maximum mounting depth. Both values are listed in the Technical Specifications of the rack and shelf product pages. If the shelf depth exceeds or does not reach the supported range, the shelf cannot be installed. Front-mount shelves: For shelves that mount only on the front posts (2-post mounting), mounting depth is not a constraint. However, there must be sufficient rear clearance in the rack to accommodate the full depth of the shelf and any installed equipment. Accessory validation: If a shelf is listed under the “Accessories” tab on a specific StarTech.com server rack product page, it has been verified as compatible with that rack model.

Related products