1 Port 10/100 Mbps Parallel Network Print Server

1 Port 10/100 Mbps Parallel Network Print Server

$19.99

Convert a Parallel printer into a stand alone network printer over a 10/100 Ethernet network

SKU: PM1115P Category:

Specifications & Compliance

UPC
065030817684
Brand
StarTech.com
Included in Package
1 - Parallel Print Server, 1 - Power Adapter (NA), 1 - Driver CD, 1 - Instruction Manual
Shipping (Package) Weight
18.4 oz [520 g]
Weight of Product
2.4 oz [67 g]
Product Length
2.2 in [55 mm]
Product Width
2.0 in [50 mm]
Product Height
0.9 in [22 mm]
Package Depth
3.1 in [78 mm]
Package Width
9.4 in [24 cm]
Package Height
6.2 in [15.8 cm]
Color
Beige
Warranty
2 Years
Connector 1
Centronics (36-Pin)
Connector 1 (Quantity)
1
Connector 2
RJ-45
Connector 2 (Quantity)
1
Material
Plastic
Power Source
AC Adapter Included
Input Voltage
115V AC
Output Voltage
7.5 DC
LED Indicators
1 - LAN, 1 - Status, 1 - Activity
Number of Ports
1
Output Current
0.5
System and Cable Requirements
Ethernet network cable not included
Plug Type
M
Center Tip Polarity
Positive
Supported Protocols
AppleTalk, IPX/SPX, NetBEUI, SMNP, TCP/IP
Remote Management Ability
Yes

Questions & Answers

When should I upgrade my device's firmware?
You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem. You can confirm this is the case by reviewing the documentation included with the firmware or by consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.

What DC barrel connector power plug types do StarTech.com products use, and what are their dimensions?
StarTech.com DC barrel connector plug types are defined in the “Plug Type” field of the technical specifications, using a letter code that specifies the connector’s outer diameter (OD) and inner diameter (ID) in millimeters for power adapter compatibility. Explanation: In StarTech.com technical specifications, the “Plug Type” field is a standardized identifier for the exact DC barrel connector size required to power a product. Each plug type is assigned a letter code that corresponds to a specific combination of outer diameter (OD) and inner diameter (ID), measured in millimeters. Common DC barrel plug type dimensions Plug Type OD ID A 2.35 mm 0.7 mm B 4.0 mm 1.7 mm C 4.75 mm 1.7 mm H 3.4 mm 1.3 mm L 5.0 mm 2.5 mm M 5.5 mm 2.1 mm N 5.5 mm 2.5 mm The DC barrel connector plug type must match both the outer diameter and inner diameter exactly. A mismatch between the StarTech.com product requirement and the power adapter connector can prevent proper fit or stable power delivery, which may result in device startup failure or intermittent operation. The plug type defines only the physical connector size. The plug type does not define electrical power requirements such as voltage, current, or polarity. The power adapter used with a StarTech.com product must match the product’s specified electrical requirements. Using an incompatible power adapter can cause device malfunction or permanent damage. This standardized DC barrel connector plug type system enables IT professionals and procurement teams to verify connector dimensions, ensure power adapter compatibility, standardize hardware deployments, and identify the correct replacement power supply for StarTech.com products.

Related products