HDMI over IP Receiver for ST12MHDLNHK - 1080p - TAA

HDMI over IP Receiver for ST12MHDLNHK - 1080p - TAA

$201.91

Broadcast your HDMI signal to multiple locations throughout your site, using your existing network infrastructure

SKU: ST12MHDLNHR Category:

Specifications & Compliance

UPC
065030879040
Brand
StarTech.com
Included in Package
1 - HDMI over IP receiver, 1 - universal power adapter (NA, EU, UK, ANZ), 1 - mounting bracket, 1 - CAT5 cables, 1 - plastic screwdriver, 1 - IR remote control, 1 - USB-A to Mini USB-B cable, 1 - DB9 to 2.5 mm serial adapter cable, 1 - IR receiver, 4 - rubber feet
Shipping (Package) Weight
26.7 oz [756 g]
Weight of Product
7.5 oz [213.0 g]
Product Length
5.1 in [13.0 cm]
Product Width
3.8 in [97.0 mm]
Product Height
0.9 in [24.0 mm]
Package Depth
6.2 in [15.7 cm]
Package Width
9.3 in [23.7 cm]
Package Height
2.6 in [66 mm]
Color
Black
Warranty
2 Years
Connector 1
HDMI
Connector 1 (Quantity)
1
Package Quantity
1
Connector 2
RJ-45
Connector 2 (Quantity)
1
Operating Temperature
0°C to 40°C (32°F to 104°F)
Storage Temperature
-10°C to 60°C (14°F to 140°F)
Humidity
0% - 80 %
Material
Aluminum
Power Source
AC Adapter Included
Special Notes
Your router must support IGMP snooping. Please refer to your network switch or router documentation to ensure IGMP snooping is supported and enabled, Each kit requires 6 to 12mbps of local area network bandwidth, when in operation
Input Voltage
100 - 240 AC
Output Voltage
5 DC
Connector 3
2.5mm (3 Conductors, TRS)
Connector 3 (Quantity)
1
LED Indicators
1 - status LED
Number of Ports
1
Input Current
0.3 A
Output Current
1
Maximum Digital Resolutions
1920x1200 (1080p) 60Hz
Audio
Yes
Plug Type
USB Mini-B (5 pin)
Connector 4
Infrared (IrDA)
Connector 4 (Quantity)
1
Wide Screen Supported
Yes
Supported Resolutions
1920x1200 60Hz
Maximum Cable Length
50.0 ft [15.2 m]
Cascadable
Yes
Rack-Mountable
Yes
Max Distance
15m [50ft]
Cabling
Cat 5e UTP or better

Questions & Answers

I’m not seeing a video signal on the display. How do I fix this?
The power adapter may not be connected at the correct unit or may not be connected at all. Please check your product manual to see where your power adapter has to be positioned. An adapter to another video signal may be connected to the Transmitter or Receiver unit. Please avoid any converters for the initial setup. The Cat 5 or 6 cable coming from the transmitter or receiver unit may be connected to a network switch. Some of our video extenders will work in this configuration, but others will not. Please check your product manual to see if your model can be used connected to an IP network. For the initial setup, avoid connecting the Cat 5 or 6 cables to any network switch, hub, or router. The category of Unshielded Twisted Pair (UTP) cables may not meet StarTech.com’s requirements. Ensure at least Cat 5, 5e, or six cables are used, and they have eight wires. Some Cat 5 cables only have four wires. If using Cat 6 cables, be aware they have more twists per foot, so you may have to use shorter cable lengths if using Cat 6 cabling between your video extenders. Bundling up the UTP cabling connected to the extenders can cause crosstalk, which will prevent the video signal from showing on the display. Unwrapping the cable should resolve this issue.

The video signal is displayed, but the quality is not very good, or the colors are not accurate. How do I fix this?
Please check to see if your model has an adjustable Gain dial on the remote unit. If it does, use it to adjust the color until it is acceptable. Replace the VGA cable with a higher quality cable like StarTech.com’s MXT101MMHQ.

Related products