5 Port 10/100 Mbps Desktop Fast Ethernet Switch

$16.99

Connect and network up to 5 Ethernet devices from a single desktop switch

SKU: DS5107 Category:

Specifications & Compliance

UPC
065030824200
Brand
StarTech.com
Included in Package
1 - Power Adapter, 1 - Instruction Manual, 1 - 5 Port Ethernet Switch
Shipping (Package) Weight
18.7 oz [530 g]
Weight of Product
10.4 oz [294 g]
Product Length
3.1 in [80 mm]
Product Width
0.6 in [14 mm]
Product Height
0.8 in [20 mm]
Package Depth
2.9 in [74 mm]
Package Width
10.4 in [26.5 cm]
Package Height
6.7 in [17 cm]
Warranty
2 Years
Connector 1
RJ-45
Connector 1 (Quantity)
5
Maximum Data Transfer Rate
100 Mbps
Industry Standards
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
Power Source
AC Adapter Included
Input Voltage
115V AC
Output Voltage
9V DC
LED Indicators
1 - Power, 5 - Link/ACT
Output Current
0.6
Plug Type
M
Center Tip Polarity
Positive
Auto MDIX
Yes
Full Duplex Support
Yes
Supported Protocols
CSMA/CD, Port Auto Sensing/Auto Negotiation

Questions & Answers

What DC barrel connector power plug types do StarTech.com products use, and what are their dimensions?
StarTech.com DC barrel connector plug types are defined in the “Plug Type” field of the technical specifications, using a letter code that specifies the connector’s outer diameter (OD) and inner diameter (ID) in millimeters for power adapter compatibility. Explanation: In StarTech.com technical specifications, the “Plug Type” field is a standardized identifier for the exact DC barrel connector size required to power a product. Each plug type is assigned a letter code that corresponds to a specific combination of outer diameter (OD) and inner diameter (ID), measured in millimeters. Common DC barrel plug type dimensions Plug Type OD ID A 2.35 mm 0.7 mm B 4.0 mm 1.7 mm C 4.75 mm 1.7 mm H 3.4 mm 1.3 mm L 5.0 mm 2.5 mm M 5.5 mm 2.1 mm N 5.5 mm 2.5 mm The DC barrel connector plug type must match both the outer diameter and inner diameter exactly. A mismatch between the StarTech.com product requirement and the power adapter connector can prevent proper fit or stable power delivery, which may result in device startup failure or intermittent operation. The plug type defines only the physical connector size. The plug type does not define electrical power requirements such as voltage, current, or polarity. The power adapter used with a StarTech.com product must match the product’s specified electrical requirements. Using an incompatible power adapter can cause device malfunction or permanent damage. This standardized DC barrel connector plug type system enables IT professionals and procurement teams to verify connector dimensions, ensure power adapter compatibility, standardize hardware deployments, and identify the correct replacement power supply for StarTech.com products.