USB Extender Hub, 24m USB 2.0 Extension Cable with 4-Port USB-A Hub, Active/Bus Powered USB Repeater Cable, Optional 10W Power Supply Included, ESD Protection - TAA
$135.29
USB Extender Hub | USB 2.0 Extension Cable with 4-Port USB Hub | Bus-Powered | 78.7ft Long Cable
Specifications & Compliance
- UPC
- 065030897280
- Brand
- StarTech.com
- Included in Package
- 1 - USB Active Cable with USB Hub, 1 - Power Adapter, 1 - Quick-Start Guide
- Shipping (Package) Weight
- 3.0 lb [1.3 kg]
- Weight of Product
- 2.3 lb [1.0 kg]
- Product Length
- 79.0 ft [24.1 m]
- Product Width
- 1.6 in [41.8 mm]
- Product Height
- 0.7 in [16.7 mm]
- Package Depth
- 8.0 in [20.3 cm]
- Package Width
- 9.4 in [23.9 cm]
- Package Height
- 2.6 in [66 mm]
- Color
- Silver & Black
- Cable Length
- 78.7 ft [24 m]
- Warranty
- 2 Years
- Connector 1
- USB-A (480Mbps, 2.5W)
- Connector 1 (Quantity)
- 1
- Package Quantity
- 1
- Connector 2 (Quantity)
- 4
- Operating Temperature
- 0°C to 50°C (32°F to 122°F)
- Storage Temperature
- -20°C to 75°C (-4°F to 167°F)
- Humidity
- 30% - 70%
- Material
- Plastic
- Cable Jacket Material
- PVC - Polyvinyl Chloride
- Maximum Data Transfer Rate
- 480 Mbps
- Connector Plating
- Nickel
- Power Source
- AC Adapter Included
- Chipset ID
- Terminus - FE1.1
- Special Notes
- When daisy chaining, a power adapter is recommended to be installed in the middle of the USB-A Extender Hubs for a stable connection </br>, The maximum recommend cable length for USB 2.0 peripherals is 16.4ft (5m)
- Input Voltage
- 100 - 240 AC
- Output Voltage
- 5 DC
- Power Consumption
- 10 W
- LED Indicators
- 1 - Solid Green = USB-A peripheral connected </br> Off = No USB-A peripheral connected </br>
- Number of Ports
- 4
- Cable Shield Material
- Aluminum-Mylar Foil with Braid
- Input Current
- 0.4 A
- Output Current
- 2
- Plug Type
- H
- Center Tip Polarity
- Positive
Questions & Answers
What DC barrel connector power plug types do StarTech.com products use, and what are their dimensions?
StarTech.com DC barrel connector plug types are defined in the “Plug Type” field of the technical specifications, using a letter code that specifies the connector’s outer diameter (OD) and inner diameter (ID) in millimeters for power adapter compatibility. Explanation: In StarTech.com technical specifications, the “Plug Type” field is a standardized identifier for the exact DC barrel connector size required to power a product. Each plug type is assigned a letter code that corresponds to a specific combination of outer diameter (OD) and inner diameter (ID), measured in millimeters. Common DC barrel plug type dimensions Plug Type OD ID A 2.35 mm 0.7 mm B 4.0 mm 1.7 mm C 4.75 mm 1.7 mm H 3.4 mm 1.3 mm L 5.0 mm 2.5 mm M 5.5 mm 2.1 mm N 5.5 mm 2.5 mm The DC barrel connector plug type must match both the outer diameter and inner diameter exactly. A mismatch between the StarTech.com product requirement and the power adapter connector can prevent proper fit or stable power delivery, which may result in device startup failure or intermittent operation. The plug type defines only the physical connector size. The plug type does not define electrical power requirements such as voltage, current, or polarity. The power adapter used with a StarTech.com product must match the product’s specified electrical requirements. Using an incompatible power adapter can cause device malfunction or permanent damage. This standardized DC barrel connector plug type system enables IT professionals and procurement teams to verify connector dimensions, ensure power adapter compatibility, standardize hardware deployments, and identify the correct replacement power supply for StarTech.com products.
