EDID Emulator for HDMI Displays - 1080p - TAA
$164.99
Add copied or ghosted EDID (Extended Display Identification Data) to your HDMI signal to ensure compatibility with your display or projector
Specifications & Compliance
- Manufacturer #
- VSEDIDHD
- UPC
- 065030861809
- Brand
- StarTech.com
- Included in Package
- 1 - EDID emulator, 1 - USB power cable, 1 - screw driver, 4 - foot pads, 1 - quick start guide
- Shipping (Package) Weight
- 9.2 oz [262 g]
- Weight of Product
- 5.4 oz [154.0 g]
- Product Length
- 3.1 in [80.0 mm]
- Product Width
- 2.0 in [52.0 mm]
- Product Height
- 0.9 in [22.0 mm]
- Package Depth
- 4.0 in [10.2 cm]
- Package Width
- 6.2 in [15.7 cm]
- Package Height
- 1.9 in [48 mm]
- Color
- Black
- Warranty
- 2 Years
- Package Quantity
- 1
- Operating Temperature
- 0°C to 40°C (32°F to 104°F)
- Storage Temperature
- -20°C to 60°C (-4°F to 140°F)
- Humidity
- 0~80% RH
- Material
- Steel
- Power Source
- USB-Powered
- LED Indicators
- 1 - status LED
- Maximum Digital Resolutions
- 1920 x 1080 (1080p) at 60Hz
- Audio
- Yes
- Plug Type
- N
- AV Input
- HDMI
- AV Output
- HDMI
- Wide Screen Supported
- Yes
- Supported Resolutions
- 1920x1080, 1680x1050, 1600x1200, 1600x900, 1440x900, 1366x768, 1280x1024, 1280x720, 1024x768
Questions & Answers
What DC barrel connector power plug types do StarTech.com products use, and what are their dimensions?
StarTech.com DC barrel connector plug types are defined in the “Plug Type” field of the technical specifications, using a letter code that specifies the connector’s outer diameter (OD) and inner diameter (ID) in millimeters for power adapter compatibility. Explanation: In StarTech.com technical specifications, the “Plug Type” field is a standardized identifier for the exact DC barrel connector size required to power a product. Each plug type is assigned a letter code that corresponds to a specific combination of outer diameter (OD) and inner diameter (ID), measured in millimeters. Common DC barrel plug type dimensions Plug Type OD ID A 2.35 mm 0.7 mm B 4.0 mm 1.7 mm C 4.75 mm 1.7 mm H 3.4 mm 1.3 mm L 5.0 mm 2.5 mm M 5.5 mm 2.1 mm N 5.5 mm 2.5 mm The DC barrel connector plug type must match both the outer diameter and inner diameter exactly. A mismatch between the StarTech.com product requirement and the power adapter connector can prevent proper fit or stable power delivery, which may result in device startup failure or intermittent operation. The plug type defines only the physical connector size. The plug type does not define electrical power requirements such as voltage, current, or polarity. The power adapter used with a StarTech.com product must match the product’s specified electrical requirements. Using an incompatible power adapter can cause device malfunction or permanent damage. This standardized DC barrel connector plug type system enables IT professionals and procurement teams to verify connector dimensions, ensure power adapter compatibility, standardize hardware deployments, and identify the correct replacement power supply for StarTech.com products.
